Epson TM-T70-i Technical Reference Guide

Chapter 2 Setup
55
2
Wireless LAN Setting
Follow the steps below to set for wireless LAN (when the optional wireless LAN cable set,
OT-WL01, is used) by using EPSON TMNet WebConfig.
1
Connect a PC for setting to the network.
2
Connect the TM-T70-i printer to the network, and turn it on.
3
Print a status sheet.
For how to print a status sheet, see "Confirming with a status sheet" on page 59.
4
Set the PC for setting as the same as the setting printed on the status
sheet.
This printer cannot be used with the LAN connection and wireless LAN connection at the
same time. When the printer is set and installed for both of them, only the LAN connection
works.
5
6
7
8
9

Epson TM-T70-i Specifications

General

Type	POS printer
Character size	1.69 x 3.38 mm
Print technology	Thermal
Wi-Fi	No
Ethernet LAN	Yes
Ethernet LAN data rates	10, 100 Mbit/s
USB connector	Micro-USB, USB Type-A
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Connectivity technology	Wired
Mean cycles between failures (MCBF)	52000000
Internal memory	256 MB
Autocutter durability	1.5 million cuts
Mean time between failures (MTBF)	360000 h
Voltage	24 V
Product color	Black

Weight and Dimensions

Depth	194 mm
Width	125 mm
Height	114 mm