Epson TM-T88 User Manual

4-2 Reference Information
Notes:
Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
The printer switches the mode of the printing speed automatically.
There may be variations in printing after switching the mode of the
printing speed. To prevent this for logo printing, using a
downloaded bit image is recommended. (Change in printing speed
does not occur during downloaded bit image printing).
Paper feeding speed: Approximately 70 mm/second
(approximately 2.76”/second) continuous
printing
Line spacing (default): 4.23 mm (1/6”)
Programmable by control command.
Number of characters: Alphanumeric characters: 95
International characters: 32
Extended graphics: 128
× 7 pages
(including one space page)
Character structure: Font A: 12
× 24 (including 2-dot spacing
in horizontal)
Font B: 9
× 24 (including 2-dot spacing in
horizontal)
Font A is the default

Epson TM-T88 Specifications

General

Print Method	Thermal Line Printing
Resolution	180 dpi
Auto Cutter	Yes
Printer Type	Receipt printer
Interfaces	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Power Consumption	1.8W (Standby)
Paper Width	80 mm or 58 mm (with paper width guide)
Power Supply	Internal (depending on the model) or External