Epson TM-T88 - Page 49

Commands 5-3
[Description] Transmits the selected printer status specified by
n
in real time, according
to the following parameters:
n
= 1: Transmit printer status
n
= 2: Transmit off-line status
n
= 3: Transmit error status
n
= 4: Transmit paper roll sensor status
DLE ENQ
n
[Name] Real-time request to printer
[Format] ASCII DLE ENQ
n
Hex 10 05
n
Decimal 16 5
n
[Range] 1 ≤
n
≤ 2
[Description] Responds to a request from the host computer.
n
specifies the request as
follows:
ESC FF
[Name] Print data in page mode
[Format] ASCII ESC FF
Hex 1B 0C
Decimal 27 12
[Description] In page mode, prints all buffered data in the printing area collectively.
ESC SP
n
[Name] Set right-side character spacing
[Format] ASCII ESC SP
n
Hex 1B 20
n
Decimal 27 32
n
[Range] 0 ≤
n
≤ 255
[Description] Sets the character spacing for the right side of the character to [n ×
horizontal or vertical motion units].
nRequest
1 Recover from an error and restart printing from the line where the error occurred
2 Recover from an error after clearing the receive and print buffers