Epson TM-T88 User Manual

5-12 Commands
ESC c 4
n
[Name] Select paper sensor(s) to stop printing
[Format] ASCII ESC c 4
n
Hex 1B 63 34
n
Decimal 27 99 52
n
[Range] 0 ≤
n
≤ 255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is
detected, using
n
as follows:
ESC c 5
n
[Name] Enable/disable panel buttons
[Format] ASCII ESC c 5
n
Hex 1B 63 35
n
Decimal 27 99 53
n
[Range] 0 ≤
n
≤ 255
[Description] Enables or disables the panel buttons.
• When the LSB is 0, the panel buttons are enabled.
• When the LSB is 1, the panel buttons are disabled.
ESC d
n
[Name] Print and feed
n
lines
[Format] ASCII ESC d
n
Hex 1B 64
n
Decimal 27 100
n
[Range] 0 ≤
n
≤ 255
[Description] Prints the data in the print buffer and feeds
n
lines.
2
Off 00 0 Paper roll end sensor disabled.
On 04 4 Paper roll end sensor enabled.
3
Off 00 0 Paper roll end sensor disabled.
On 08 8 Paper roll end sensor enabled.
4-7 - - - Undefined.
Bit Off/On Hex Decimal Function
0
Off 00 0 Paper roll near-end sensor disabled.
On 01 1 Paper roll near-end sensor enabled.
1
Off 00 0 Paper roll near-end sensor disabled.
On 02 2 Paper roll near-end sensor enabled.
2-7 - - - Undefined.
Bit Off/On Hex Decimal Function

Epson TM-T88 Specifications

General

Print Method	Thermal Line Printing
Resolution	180 dpi
Auto Cutter	Yes
Printer Type	Receipt printer
Interfaces	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Power Consumption	1.8W (Standby)
Paper Width	80 mm or 58 mm (with paper width guide)
Power Supply	Internal (depending on the model) or External