Epson TM-T88

Commands 5-19
GS \
n
L
n
H
[Name] Set relative vertical print position in page mode
[Format] ASCII GS \
n
L
n
H
Hex 1D 5C
n
L
n
H
Decimal 29 92
n
L
n
H
[Range] 0 ≤
n
L
≤ 255
0 ≤
n
H
≤ 255
[Description] Sets the relative vertical print starting position from the current
position in page mode.
•
This command sets the distance from the current position to
[(
n
L
+
n
H
×
256)
×
vertical or horizontal motion unit].
GS ^
r t m
[Name] Execute macro
[Format] ASCII GS ^
r t m
Hex 1D 5E
r t m
Decimal 29 94
r t m
[Range] 0 ≤
r
≤ 255
0 ≤
t
≤ 255
m
= 0, 1
[Description] Executes a macro.
•
r
specifies the number of times to execute the macro.
•
t
specifies the waiting time for executing the macro.
The waiting time is
t
×
100 msec for every macro execution.
•
m specifies macro executing mode.
•
When
m
= 0:
The macro executes r times continuously with interval specified by
t
.
•
When
m
= 1:
After waiting for the period specified by
t
, the PAPER OUT LED
indicator blinks and the printer waits for the FEED button to be
pressed. After the button is pressed, the printer executes the macro
once. The printer repeats the operation
r
times.
GS a
n
[Name] Enable/Disable Automatic Status Back (ASB)
[Format] ASCII GS a
n
Hex 1D 61
n
Decimal 29 97
n
[Range] 0 ≤
n
≤ 255