Epson TM-T88V-DT

12
Editing the setting.ini file
The setting.ini file is written as follows. Edit the contents to match your settings. Delete any areas
that are not required for setting.
Different firmware versions provide different functions. If the setting.ini file from a newer
version runs on an older version of the TM-DT, any functions not implemented on the old TM-
DT are ignored, but the supported functions are executed.
This file is for the firmware ver.2.5.
[General]
Administrator = Tom
Location = Counter001
[WiredNetwork]
IPAddressSettingMethod = Manual
IPAddress = 172.150.1.2
SubnetMask = 255.255.255.0
Gateway = 172.150.1.1
DNSServerSettingMethod = Manual
DNSServerAddress1 = 172.150.1.201
DNSServerAddress2 = 172.150.1.202
DNSServerAddress3 = 172.150.1.203
[Wireless]
NetworkMode = Infrastructure
SSID = SSID.ueda
AuthenticationMethod = WPA2
EncryptionMethod = AES
DefaultWEPKey = 1
WEPKey1 = epson
WEPKey2 = 12345
WEPKey3 = 12345
WEPKey4 = 12345
PresharedKey = epson1234
[WirelessNetwork]
IPAddressSettingMethod = Manual
IPAddress = 172.160.20.2
SubnetMask = 255.255.255.0
Gateway = 172.160.20.1
DNSServerSettingMethod = Manual
DNSServerAddress1 = 172.160.20.201
DNSServerAddress2 = 172.160.20.202
DNSServerAddress3 = 172.160.20.203
Wired LAN settings
Wireless LAN settings