Epson TM-T88V-DT

26
Saving the additional content
The additional contents vary depending on the environment you are constructing. Save the
necessary files for your environment on the USB memory.
NetworkPrinter-
%X%
Encryption-
Method
Designates the encryption method.
 If the value for “Authentication Method” is “OpenSystem”,
designate “None” or “WEP”.
 If the value for “Authentication Method” is “SharedKey”,
designate “WEP”.
 If the value for “Authentication Method” is “WPA”,
“WPA2”, “WPAPSK”, “WPA2PSK”, designate “TKIP” or
“AES”.
“None” / “WEP” / “TKIP” / “AES”
DefaultWEPKey Designates the WEP key in use (1 to 4).
“WEPKey1” / “WEPKey2” / “WEPKey3” / “WEPKey4”
WEPKey1 to 4 Designates the WEP key that corresponds to the WEP key
number.
 For the pass phrase, designates 5 or 13 alphanumeric
characters and symbols (excluding spaces) .
 For hexadecimals, use either 10 or 26 alphanumeric char-
acters (0 to 9, a to f, A to F).
PresharedKey Designates the pre-shared key used when using WPAPSK or
WPA2PSK.
 For the pass phrase, designate between 8 and 63 alpha-
numeric characters and symbols (excluding spaces).
Password Designates the password of the TM printer for which the
settings are to be edited.
Within 30 alphanumeric characters.
 When execute Easy Setup, the existing contents are deleted, and overwritten by
additional contents in the USB memory.
Zip the contents to be saved all together.
 The maximum size of the files before zipping is 100 MB.
Section name Parameter
Description
Valid value