Chapter 3 Easy Setup for the TM-DT
27
3
Easy Setup for the TM-DT
This section explains the method for setting up a TM-DT using the Easy Setup.
Flow of the Easy Setup
Install TM-DT using this Easy Setup through the following flow.
In this set-up flow, items explained in this manual are framed in an solid line, while items
where you must refer to the user's manual for each TM-DT are framed in a dotted line.
1. DInstalling the TM-DT
❏ Installing the TM-DT
❏ Setting the roll paper
❏ Connecting the AC adaptor
❏ Install the connector cover
2. "Connecting the USB memory" (page 28)
3. "Checking the printing result" (page 29)
To Next Page
Loading...
