Epson TM-T88V-DT

Chapter 2 Preparing the setting file
25
2
NetworkPrinter-
%X%
SubnetMask Designates the subnet mask.
 If the value for "IPAddressSettingMethod" is "Manual", this
must be set.
 If the value for "IPAddressSettingMethod" is “Auto”, this is
ignored.
 Format of [numerical value 0 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 255]
 The following address(es) cannot be used.
0.0.0.0
127.0.0.1
255.255.255.255
255.0.255.0
Gateway Designates the default gateway.
 This is ignored if the value for IPAddressSettingMethod is
"Auto".
 Format of [numerical value 0 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 255]
 The following address(es) cannot be used.
127.0.0.1
NetworkMode Designates the operation mode for wireless LAN.
“Adhoc” / “Infrastructure”
SSID Designates the SSID.
1 to 32 alphanumeric characters and symbols (excluding
spaces)
AdhocChannel Designates the adhoc channel used when the wireless LAN
operation mode is "Adhoc".
If "Infrastructure" is used for the wireless LAN operation mode
designates "1".
“1” to “11”
Communication-
Standard
Designates the communication standard for wireless LAN.
“802.11b” / “802.11b/g/n” / “802.11b/g/n”
Authentication-
Method
Designates the authentication method.
 If the value for “NetworkMode” is “Adhoc”, designate
“OpenSystem” or “SharedKey”.
 If the value for “NetworkMode” is “Infrastructure”, desig-
nate “OpenSystem”, “SharedKey”, “WPA”, “WPA2”,
“WPAPSK”, or “WPA2PSK”.
“OpenSystem” / “SharedKey” / “WPA” / “WPA2” / “WPAPSK”
/ “WPA2PSK”
Section name Parameter
Description
Valid value