Epson TM-T88VI Series - Port Information

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88VI)
6
When using with the power saving mode, set DIP-SW2-3 and DIP-SW2-4 to ON.
2.3 Port Information
1) Port information when serial port is used
The port information that can be set with the SetupPOS utility is as follows.
Item Setting range
Baud rate [bps] 2400, 4800, 9600, 19200, 38400, 57600,
115200
Bit length [bit] 8
Parity NONE, ODD, EVEN
Stop bit [bit] 1
Handshake DTR/DSR
The default settings are as shown in the following table.
Item Setting range
Baud rate [bps] 38400
Bit length [bit] 8
Parity NONE
Stop bit [bit] 1
Handshake DTR/DSR
2) Port information when using parallel port
Not applicable
3) Port information when using USB port
Not applicable
4) Port information when using Ethernet port
Not applicable
5) Port information when using Bluetooth port
Not applicable