Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88VI)
25
Section 4. Warnings
This section describes precautions in use of TM-T88VI models.
z When using the network connection, always use a build-in Ethernet Interface or
OT-WL02/05, UB-R04 interface board. If a device is connected via other interface
board, Epson will not be responsible for any consequences.
z Thai1 Pass mode printing:
If print data remains in the printer buffer when printing is executed (i.e. The line feed
for the print data was not completed), it is possible that the result will not be printed
correctly.
z When the power is turned on or off while using a Bluetooth connection, the recovery
process might take time to complete.
To Previous Page
Loading...
