Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88VI)
23
3.12 Electronic Logo Function (NVRAM)
The TM-T88VI models feature an electronic logo function (NVRAM). To
use
NVRAM, startup TM-T88VI utility from “Device Specific Settings” of SetupPOS
utility, and register image files (BMP style) with NVRAM in advance.
For the details of the registration, please refer to the “TM-T88VI Utility User's
Manual”.
To print image files registered with NVRAM, please use the either of the following
DirectIO:
PTR_DI_FLASH_BITMAP
PTR_DI_FLASH_BITMAP2.
Please refer to the corresponding part of the Section 4 of “EPSON OPOS ADK
MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)” for
detail. The available NVRAM sizes are as follows:
TM-T88VI : 262144 bytes
3.13
Printable bitmap types and sizes
The TM-T88VI models support the following
bitmap
commands. For the detail,
please refer to the corresponding part of the Section 3 of “EPSON OPOS ADK
MANUAL APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)”. The
allowance ranges for bitmaps are as follows.
Allowance range
Bitmap command type
X (dot) y (dot) xy
Download bitmap 1~2040 1~384 <= 98304
Raster bitmap 1~2400 1~4095
One-line bitmap No setting range
To Next Page
Loading...
