Epson TM-T88VI Series - Power Condition Reports; Synchronous Processing; Printing Positions

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88VI)
22
[Special characters of Barcodes (GS1 DataBar 128, GS1 DataBar Expanded
and GS1 DataBar Expanded Stacked)]
Special characters ASCII
FNC1 {1
FNC3 {3
‘{’ {{
‘(’ {(
‘)’ {)
‘*’ {*
3.9 Power Condition Reports
The TM-T88VI models support Power Condition Reports as follows.
Powered on reporting: Supported
Powered off reporting: Unsupported
3.10 Synchronous Processing
The TM-T88VI models use Process ID to determine output completion.
Use of the Process ID allows multiple print commands to be queued to the printer
simultaneously. For this reason, Asynchronous output (AsyncMode =
TRUE)
gives a performance improvement.
3.11 Printing Positions
The TM-T88VI models support the function for setting printing position.
Function Receipt
Left margin O
Printing Position O
O: Supported
X: Unsupported
When the left margin setting function is supported, it is possible to specify the
horizontal printing position of the bitmap or barcode by dots unit.
When the printing position settings are supported, it is possible to specify the
horizontal printing position of the text, bitmap, or the barcode to the left, center, or
the right side of the paper.