Epson TM-T88VI Series - Width and Height Properties

Version 3.00 Feb. 2019
APPLICATION DEVELOPMENT GUIDE
POSPrinter (TM-T88VI)
11
3.1.3 Width and Height Properties
The width and height properties are described below.
Settings
Property
Default
Value
Maximum
value [dot]
Minimum
value [dot]
RecLineSpacing 30 127 24
*1
JrnLineSpacing X X X
SlpLineSpacing X X X
SlpLineHeight [dot] X
RecLineHeight [dot]
(Font A) 24
(Font B) 17
JrnLineHeight [dot] X
SlpLineWidth [dot] X
RecLineWidth [dot] (79.5mm) 512
(57.5mm) 360
JrnLineWidth [dot] X
RecSidewaysMaxLines 17
*2
RecSidewaysMaxChars (Font A) 138
(Font B) 184
RecLinesToPaperCut 5
*3
SlpSidewaysMaxLines X
SlpSidewaysMaxChars X
SlpMaxLines X
X: No settings
*1
When Font A is selected. In the case of a line thermal station, the Line Spacing setting is
identical with the height of the characters which means that it can be set at up to 17
when Font B is selected.
*2
It can be changed by the settings of the RecLineSpacing or the RecLineHeight.
*3
It can be changed by the settings of the RecLineSpacing or the character height.