Setting Options Description
Fax Report Fax Settings List Prints the current fax settings.
Fax Log Prints a transmission report automatically after you
send a fax.
Last Transmission Prints a report for the previous fax that was sent or
received through polling.
Protocol Trace Prints a list of fax documents stored in the printer’s
memory, such as unfinished jobs.
Parent topic: Sending Faxes from the Product Control Panel
Dialing Fax Numbers from a Connected Telephone
If you have connected a telephone to the EXT port on your product, you can send a fax by dialing the
number from the connected telephone. If the recipient's phone number and fax number are the same,
you speak to the recipient before sending the fax.
1. Place your original on the product for faxing.
2. Press the home button, if necessary.
3. Dial the fax number from the connected telephone. Speak to the recipient if necessary.
4. Press one of the Start buttons to select Send Fax.
Note: Your product communicates with the recipient's fax machine. Do not hang up the telephone
yet.
5. Press one of the Start buttons to select Send.
6. When you hear a fax tone, press one of the Start buttons to start sending the fax.
7. Hang up the telephone.
Note: If your recipient's fax machine does not print in color, your fax is automatically sent in black-
and-white.
Parent topic: Sending Faxes from the Product Control Panel
Related references
Fax Send Settings
175
To Next Page
Loading...
Need help?
General
