To Next Page
B
bryandanielsAug 7, 2025
What to do if Epson Printer indicates error during power-on sequence?
- JJeffrey JordanAug 7, 2025
If your Epson Printer shows an error during the power-on sequence, several factors could be the cause. Ensure the maintenance box is installed correctly by turning the printer off, reinstalling the maintenance box, and then turning it back on. Check if any ink cartridges are empty and replace them if needed. If the ink cartridge data is incorrect or not recognized, try removing and reinstalling the cartridge. Make sure all ink cartridges are properly installed. Also, verify that the scanner unit (printer cover) is closed. Finally, if a paper jam occurred before the initial ink charge, open the scanner unit and remove the CR fixing tape.
General
