Epson WF-7110 Series User Manual

Epson WF-7620 / WF-7610 / WF-7110 Series Revision B
Adjustment Required Adjustments 60
Confidential
Part Name
PS Unit
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- O O O O O ---
Printhead
Remove
--- --- --- --- --- --- --- --- ---
Replace
O --- --- --- --- --- --- --- O
CR Driven Pulley Assy
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- ---
Paper Guide Upper Assy
Remove
--- --- --- --- --- --- --- --- ---
Replace
O --- --- --- --- --- --- --- ---
CR Guide Frame Assy
(w/CR Unit)
Remove
--- --- --- --- --- --- --- --- ---
Replace
O --- --- --- --- --- --- --- ---
Front Frame
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- ---
Star Wheel Assy
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- ---
Frame Base 2nd Assy
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- O --- --- ---
Main Frame Unit
Remove
--- --- --- --- --- --- --- --- ---
Replace
O O O O O --- --- --- ---
PF Motor
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- O --- --- --- ---
CR Motor
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- O --- --- --- --- ---
PE Lever Assy
Remove
--- --- --- --- --- --- --- --- ---
Replace
O O --- O O --- --- --- ---
PE Sensor
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- ---
Paper Guide Lower Porous
Pad
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- ---
Part Name
APG Unit
Remove
--- --- --- --- --- --- --- --- ---
Replace
--- --- --- --- --- --- --- --- ---
Table 3-3. Required Adjustment List 2 (Adjustment using the Adjustment Program)
Adjustment Type Adjustment using the Adjustment Program
Priority 13 14 15 16 17 18 19 20 21
Adjustment Item
Paper skew
adjustment
PF / EJ
deterioration offset
PW Detector light quantity
adjustment
CR motor heat protection
control
PF motor heat protection
control
ASF motor heat protection
control
*1
Scanner motor heat
protection control
*2
ADF motor heat protection
control
*2
PIS board check
Purpose
To align print start position at 0-
digit side with that at 80-digit
side in bidirectional band
printing, timing of firing ink
droplet is adjusted through
software control
To reset the counter or set it to
its maximum according to the
replaced parts
To correct the light quantity
variations depending on the
factor such as sensor
characteristics or installation
posture
To measure and correct the electrical variation of each motor and the power supply board. (For Scanner motor and ADF motor, re-measurement preparation) To check the light correction
value (Duty) to check the time to
replace the PIS
Printout pattern
--- --- --- --- --- --- --- ---
How to judge
Examine the printout pattern
and enter the number of the one
with the least gap and overlap
between the two different
colored lines.
--- --- --- --- --- --- --- ---
Adjustment program
OOOOOOOOO
Tool
--- --- --- --- --- --- --- --- ---
Note "*1": WF-7620/7110 Series only
"*2": WF-7620/7610 Series only
OK NGNG

Epson WF-7110 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 2400 dpi
Duplex Printing	Yes
Input Tray Capacity	250 sheets
Wireless	Yes
Functions	Print
Maximum Resolution	4800 x 2400 dpi
Max Print Size	13" x 19"
Connectivity	USB, Ethernet, Wi-Fi
Paper Sizes	Letter, Legal, A4, A5, A6
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Ink Cartridges	Black, Cyan, Magenta, Yellow
Print Speed (Black)	15 ppm (ISO)