Epson WF-7210 - Resetting Control Panel Defaults

150
Print Head Cleaning
Uninstall Your Product Software
Related references
Where to Get Help
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
Note: This setting can be locked by an administrator. If you cannot access or change this setting,
contact your administrator for assistance.
1. From the Home screen, select Settings and press the OK button.
2. Press the down arrow button, select System Administration and press the OK button. Enter the
administrator password, if necessary.
3. Press the down arrow button, select Restore Default Settings and press the OK button.
You see this screen:
4. Select one of these options, then press the OK button:
• Network Settings: Resets all network settings.
• Clear All Data and Settings: Resets all control panel settings.
You see a confirmation screen.
5. Select the up arrow button to reset the selected settings. (Press the down arrow button if you want to
cancel the operation.)
Parent topic: Solving Problems