EasyManua.ls Logo

Epson WF-7210 - Interface Specifications; Network Interface Specifications

Epson WF-7210
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
189
Interface Specifications
Interface type Hi-Speed USB (Device Class for computers)
Parent topic: Technical Specifications
Network Interface Specifications
Note: Wireless LAN standard complies with either IEEE 802.11 b/g or IEEE 802.11 b/g/n, depending on
purchase location.
Wi-Fi
Standard IEEE 802.11 b/g/n
Security WPA2-PSK (AES); complies with WPA2 standards with support for
WPA/WPA2 Personal
WEP (64/128 bit)
Frequency band 2.4 GHz
Maximum radio-frequency
power transmitted
19.8 dBm (EIRP)
Coordination modes Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Ethernet
Standard IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded
twisted pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); the connected device
should be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45

Table of Contents

Related product manuals