Epson WF-7210 - Wi-Fi Protected Setup (WPS); Using WPS to Connect to a Network

37
Once setup is complete, you see this screen:
9. Press the OK button to view the SSID and new password.
10. Press the home button to return to the Home screen.
Parent topic: Enabling Wi-Fi Direct Mode
Related tasks
Entering Characters on the LCD Screen
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.
Using WPS to Connect to a Network
Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. From the Home screen, select Wi-Fi and press the OK button.