The Add Printer Wizard appears.
3. For Windows 8, 8 x64, 7, 7 x64, Vista, Vista x64, Server 2012, Server 2008, or Server 2008 x64, select
Add a local printer.
For Windows XP, XP x64, 2000, Server 2003, click Next to proceed the next screen, select Local
printer, then click Next.
Note for Windows XP, 2000, or Server 2003 users:
Do not select the Automatically detect and install my Plug and Play printer check box.
4. Select the Create a new port check box and select Standard TCP/IP Port from the drop-down
list. Click Next.
5. (For Windows XP, 2000, or Server 2003 users only) Click Next.
6. Specify the IP address and port name, then click Next.
7. Click Finish.
8. Click Have Disk in the Add Printer Wizard and specify the following path for the Software Disc. If
your CD/DVD drive is D:, the path will be D:\Driver\PostScript\<model name>\eppsnt.inf. Then
click OK.
Note:
Change the drive letter as needed for your system.
9. Select the printer and click Next.
10. Follow the on-screen instructions for the rest of the installation.
11. When installation is done, click Finish.
Accessing the PostScript printer driver
You can change the PostScript printer driver settings in the PostScript printer driver. To access the
printer driver, see “Accessing the printer driver” on page 170.
AL-M300/AL-M400 Series User's Guide
About the Printer Software 192
To Next Page
Loading...
Need help?
General