The printer is canceling the specified print job and the current print job. This message appears when
Cancel Job is selected after you specify the file to be canceled on the control panel.
Can’t Print
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver are used.
Can’t Print Duplex
The printer has encountered problems during duplex printing. Make sure you are using an
appropriate type and size of paper for the duplex printing. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the OK button will print the rest of the
print job on only one side of the paper. To cancel the print job, see “Canceling Printing” on
page 110.
Can’t Use Bookmark
The registered menu cannot be used because the menu is disabled by changing any settings after
registered the menu in bookmark.
Cassette Error 001, Cassette2 Error 002, Cassette3 Error 003 (For AL-M400 Series only),
Cassette4 Error 004 (For AL-M400 Series only)
The wrong cassette unit is installed. Turn off the printer, remove the cassette unit, and then turn on the
printer.
CF CHECK (For AL-M400 Series only)
The printer is checking the CompactFlash memory.
Check Paper Size
The paper size setting is different from th e size of pa per lo aded in the printer. Check to see if the correct
size of paper is loaded in the specified paper source.
To clear this warning message, select Clear Warning from the control panel’s Reset Menu. See
“How to access the control panel menus” on page 61 for instructions.
Check Paper Type
AL-M300/AL-M400 Series User's Guide
Using the Control Panel 96
To Next Page
Loading...
Need help?
General