1. Turn off the printer.
2. Disconnect any connected interface cables.
3. Load plain paper.
4. Hold down the ink button as you press the power button to turn the printer back on. Hold down
both buttons until the power light begins to flash, then release the buttons.
The printer begins printing a nozzle check pattern.
5. Do the following, depending on the results of the printer check:
• If the page prints and the nozzle check pattern is complete, the printer is operating properly. Any
printing problem you may have could be caused by your computer, cable, software, or selected
print settings. Check the other solutions in this section or try uninstalling and reinstalling your
printer software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the printer may have a problem. Check the other solutions in this book.
If they do not work, contact Epson.
Parent topic: Solving Problems
118
To Next Page
Loading...
