EasyManua.ls Logo

Epson WorkForce WF-7010 - Removing and Installing Ink Cartridges

Epson WorkForce WF-7010
157 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ink color Part number
High-capacity Extra High-capacity
Magenta 126 127
Yellow 126 127
Parent topic: Purchase EPSON Ink Cartridges
Removing and Installing Ink Cartridges
Make sure you have your replacement cartridges handy before you begin. You must install new
cartridges immediately after removing the old ones.
Caution: Leave your old cartridges in the printer until you are ready to replace them to prevent the print
head nozzles from drying out. Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
1. Turn on your product.
2. If an ink cartridge is low, the ink out light on the control panel flashes and a message appears on
your computer screen. The ink out light remains illuminated if the cartridge is completely
expended. Note which cartridges need to be replaced.
3. Open the cover.
93

Table of Contents

Other manuals for Epson WorkForce WF-7010

Related product manuals