5. Select the name of your wireless network (SSID) or enter the name manually.
Note: To enter the wireless network name manually, press the arrow buttons to select Other SSIDs
and press the OK button. Use the displayed keypad to enter your network name, as described in the
next step.
6. Enter your wireless password (or network name and then password) using the displayed keypad.
Note: If your password has uppercase (ABC) or lowercase (abc) letters, make sure you enter them
correctly.
• Press the arrow buttons to highlight a character or a function button displayed on the keypad.
Then press the OK button to select it.
• To change the case of letters or select symbols, select AB12 (uppercase), ab12 (lowercase), or
Symbol and press the OK button. Then highlight an option and press the OK button to select it.
• To enter a space, select Space and press the OK button.
• To delete characters, select the back arrow and press the OK button.
• When you finish entering characters, select Done and press the OK button.
7. Confirm the displayed network settings and press the OK button to save them.
Note: If you need to change a setting, press the Back button.
25
To Next Page
Loading...
