Epson XP-5150 Series

4.
Select Various prints on the control panel.
To select an item, move the focus to the item using the
u d l r buttons, and then press the OK button.
5.
Select Message Card.
6.
Select the device from which you want to load images, make settings for images and ruled lines, and then
select Done.
7.
Do one of the following.
❏ When selecting Template Ar t as the Select Location setting: Select an image.
❏ When selecting Memory Device as the Select Location setting: Select a photo, and then select Use is
Photo.
❏ When selecting Do Not Use Image as the Select Location setting: Go to the next step.
8.
Make the paper settings.
9.
Press the
r button.
10.
Select the layout.
11.
Press the
button to edit the photo as necessary.
12.
Enter the number of copies, and then press the
x button.
Related Information
& “Loading Paper in the Paper Cassette” on page 44
& “List of Paper Type” on page 48
& “Inserting a Memory Card” on page 50
& “Menu Options for Printing Original Message Cards” on page 100
& “Menu Options for Paper and Print Settings” on page 93
& “Guide to the Preview Screen” on page 88
& “Guide to the Edit Photo Screen” on page 88
& “Menu Options for Editing Photos” on page 94
Menu Options for Printing Original Message Cards
Select Location:
When printing an image on a message card, select whether to use an image stored in the printer or a
photo on a memory device. If you do not print any images, select Do Not Use Image.
Image Position:
Select where you want to place the image on the message card.
Printing > Printing from the Various prints Menu on the Control Panel > Printing an Original Message Card
100