Epson XP-830 - Receiving Faxes Automatically (Auto Answer)

Note: If you run out of paper during fax printing, load more paper and press the button indicated on your
product's LCD screen to continue.
Parent topic: Receiving Faxes
Receiving Faxes Automatically (Auto Answer)
To receive and print faxes automatically, you can turn on Auto Answer mode.
Check the auto answer icon in the upper right corner of your product's Home screen to see if Auto
Answer mode is turned on or not.
To turn Auto Answer mode on or off, select Setup > Fax Settings > Receive Settings > Auto Answer.
If an answering machine is connected, make sure the product's Rings to Answer setting is set higher
than the number of rings your answering machine is set to answer a call. For example, if the answering
machine is set to pick up on the fourth ring, set the product to pick up on the fifth ring or later.
If a telephone is connected, and you use it to answer a call that turns out to be a fax, wait until the
product's LCD screen displays a message that a connection has been made before hanging up.
Parent topic: Receiving Faxes
Related references
Fax Receive Options
Fax Communications Options
Related tasks
Receiving Faxes Manually
240