• Load a sheet of loose-leaf or other paper with holes as shown, and push it approximately 2 inches
(5 cm) into the slot.
7. Slide the edge guides against the paper or envelope, but not too tightly.
8. When you are ready to print, press the Start button.
Note: The output tray opens automatically when you print. Leave enough space in front of the
product for the paper to be fully ejected.
Always follow these loading guidelines:
• Load one sheet or envelope at a time.
• Load the paper or envelope short edge first and printable side faceup.
• Check the paper package for any additional loading instructions.
64
To Next Page
Loading...
