6. Return the printer to its normal position, and then insert the paper cassette.
c
Important:
Do not leave the printer standing for a long time.
7. Connect the power cord.
Cleaning the Scanner Glass
When the copies or scanned images are smeared or scued, clean the scanner glass.
c
Important:
Never use alcohol or thinner to clean the printer. ese chemicals can damage the printer.
1. Open the document cover.
2. Use a so, dry, clean cloth to clean the surface of the scanner glass.
Note:
❏ If the glass surface is stained with grease or some other hard-to-remove material, use a small amount of glass cleaner
and a so cloth to remove it. Wipe o all remaining liquid.
❏ Do not press the glass surface too hard.
❏ Be careful not to scratch or damage the surface of the glass. A damaged glass surface can decrease the scan quality.
Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it o automatically if it is not
connected to the network for 30 minutes.
Saving Power - Control Panel
1. Enter Settings from the home screen using the
l
or
r
button, and then press the OK button.
User's Guide
Maintaining the Printer
126
To Next Page
Loading...
