Epson XP-900 Series - Copying Functions; Copying Basics and Settings

Copying
Copying Basics
1. Load paper in the printer.
When loading in the rear paper feed slot, do not load paper until the printer prompts you to do so.
c
Important:
Make the paper settings on the control panel.
2. Place the originals.
3. Enter Copy from the home screen using the
l or r button, and then press the OK button.
4. Set the number of copies using the – or + button.
5. Select color copy or monochrome copy using the
l or r button.
6. Select Paper and Copy Settings using the
d button, and then press the OK button. Check the settings such as
the paper size and the paper type and change the settings if necessary. Select the setting items using the
u or
d button and change the settings using the l or r button.
Note:
If you want to copy by reducing or enlarging the size of a document by a specic percentage, select Custom Size as the
Reduce/Enlarge setting, and then specify a percentage using the – or + button. You can change the percentage in
increments of 5% by pressing and holding down the – or + button.
7. Press the x button. When printing from the rear paper feed slot, press the x button, and then load paper
when you are instructed to do so.
Note:
e color, size, and border of the copied image are slightly dierent from the original.
Related Information
&
“Loading Paper in the Paper Cassette” on page 39
&
“Loading Paper in the Rear Paper Feed Slot” on page 43
&
“Placing Originals on the Scanner Glass” on page 47
&
“Menu Options for Copy Mode” on page 90
Menu Options for Copy Mode
Note:
Available menus vary depending on the layout you selected.
The number of copies
Enter the number of copies.
User's Guide
Copying
90