Loading a CD/DVD for Printing
Printable CD/DVDs
You can print on a circular 12-cm CD/DVD labelled as suitable for printing, for example "printable on the label
surface" or "printable with ink jet printers." To print on a CD/DVD with a higher quality print surface, select
CD/DVD Premium Surface as the Paper Type in the printer driver.
You can also print on Blu-ray Discs™.
CD/DVD Handling Precautions
❏ See the documentation provided with your CD/DVD for more information on handling the CD/DVD or
writing data.
❏ Do not print on the CD/DVD before writing your data to it. If you do, ngerprints, dirt, or scratches on the
surface may cause errors while writing data.
❏ Depending on the CD/DVD type or printing data, smearing may occur. Try making a test print on a spare CD/
DVD. Check the printed surface
aer
waiting for one full day.
❏ Compared to printing on genuine Epson paper, the print density is lowered to prevent ink from smearing on the
CD/DVD. Adjust the print density as necessary.
❏ Allow the printed CD/DVDs at least 24 hours to dry avoiding direct sunlight. Do not stack or insert the CD/
DVDs into your device until they are completely dry.
❏ If the printed surface is sticky even
aer
it has dried, lower the print density.
❏ Reprinting on the same CD/DVD may not improve the print quality.
❏ If the CD/DVD tray or the internal transparent compartment are accidentally printed on, immediately wipe o
the ink.
❏ Depending on the print area setting, the CD/DVD or CD/DVD tray may get dirty. Make settings to print on the
printable area.
Related Information
& “Printable Area for CD/DVD” on page 185
Loading and Removing a CD/DVD
When printing on or copying a CD/DVD, instructions are displayed on the control panel informing you when to
load the CD/DVD. Follow the on-screen instructions.
Related Information
& “Printing Photos from a Memory Card onto a CD/DVD Label” on page 54
& “Menu Options for Copy to CD/DVD” on page 96
User's Guide
Loading a CD/DVD for Printing
52
To Next Page
Loading...
