eQ-3 MAX! - Troubleshooting and Error Codes; Troubleshooting: Battery Low; Troubleshooting: Error F4; Troubleshooting: Error F5

58
19. Remedy
Error code on
the display
Problem Solution
Battery symbol
(
)
Battery voltage
too low
Replace batteries
F4 MAX! Cube al-
ready taught-in
Make sure the
device is no lon-
ger taught-in to
the Cube (in the
software) and
perform a reset.
Then you can
teach-in the de-
vice again.
F5 Temperature
sensor defec-
tive
Replace device
Slowly as-
hing antenna
symbol
Connection to
taught-in MAX!
components
lost
Check the po-
wer supply and
the batteries of
taught-in MAX!
components
Quickly as-
hing antenna
symbol
Duty cycle limit
reached
The device can
resume radio
communication
after a waiting
time of approx.
one hour