18
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to
help reduce hand arm vibration syndrome injuries to power tool users. The
directive requires power tool manufacturers and suppliers to provide indicative
vibration test results to enable users to make informed decisions as to the period
of time a power tool can be used safely on a daily basis and the choice of tool.
SEE TECHNICAL SPECIFICATIONS IN THE INSTRUCTION MANUAL FOR THE
IBRATION LEVELS OF YOUR TOOL.
The declared vibration emission value should be used as a minimum level
and should be used with the current guidance on vibration.
Calculating the actual period of the actual period off use can be difficult and
the HSE website has further information.
WARNING ! The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
- How the tool is used and the materials being cut or drilled.
- The tool being in good condition and well maintained.
- The use the correct accessory for the tool and ensuring it is sharp
and in good condition.
- The tightness of the grip on the handles.
- And the tool is being used as intended by its design and these
instructions.
The declared vibration emission been measured in accordance with a standardised
test stated above and may be used to compare one tool with another tool.
The declared vibration emission value may also be used in preliminary assessment
of exposure.
While working with this power tool, hand/arm vibrations occur. Adopt the correct
working practices in order to reduce the exposure to vibration. This tool may
cause hand-arm vibration syndrome if its use is not adequately managed.
To Next Page
Loading...
