34
THE GOLDEN RULES FOR CLEANING
Care & maintenance
Note : For those optional accessories, you can consult
or purchase through an authorized customer service
centre or store.
WARNING ! Always switch the product off, disconnect the
product from the power supply and let the product cool
down before performing inspection, maintenance and
cleaning work!
• Keep the product clean. Remove debris from it after each use and
before storage.
• Regular and proper cleaning will help ensure safe use and prolong the
life of the product.
• Inspect the product before each use for worn and damaged parts.
Do not operate it if you find broken and worn parts
GENERAL CLEANING
• Keep the tool’s air vents unclogged and clean at all times.
• Remove dust and dirt regularly with a cloth or soft brush.
• Never use caustic agents to clean plastic parts. A damp cloth is
recommended.
Water must never come into contact with the saw.
• Re-lubricate all moving parts at regular intervals.
Note : Do not use chemical, alkaline, abrasive or other
aggressive detergents or disinfectants to clean this
product as they might be harmful to its surfaces.
To Next Page
Loading...
