EREAGLE Ere-E1S - 3 Quick Start; Battery Installation; SD;TF Card Installation; SIM Card Installation

10
3. Quick start
According to the instruction of above parts, operate the corresponding button, then you can complete
the basic operation.
3.1. Battery installation
Prepare 4 x AA / 8 x AA / 12 x AA group of alkaline batteries, a group needs at least 4 x AA alkaline
batteries.
Open the camera bottom cover, unlock the battery cover plate, to put the alkaline batteries in the battery
box according to the polarity marked on the battery cover correctly , then close the battery cover.
3.2. TF Card installation
After the battery is installation, insert the TF card to the right direction, make sure the TF card is
unlocked before installation. (We recommend using C10 standard Sandisk brand TF card)
TF CARD SIM CA RD
USBTV
OF F TEST ON
DC 6V
3.3. SIM Card installation
After TF card is installed, insert the SIM card correctly according to the specified direction, support the
four bands: 850/900/1800 / 1900mhz.
TF CARD SIM CA RD
USBTV
OF F TEST ON
DC 6V