13
Audio
Audio Record This setting is used to turn on or off sound while recording
Boot Sound Set whether the start beep is turned on or off.
Key Sound Set whether to turn on or off the key beep.
Parameter PIR
PIR Mode
Select PIR trigger mode, you can use Main PIR trigger or Side PIR +
Main PIR trigger mode.
【Main PIR Trigger】: This is the most common trigger mode. In this
mode, only the Main PIR can trigger the shooting and the Side PIR is
disabled.
[Side PIR + Main PIR trigger]: This mode is mainly used to capture fast
speed of the heat source objects. In this mode, the Side PIR trigger will
pre-start the camera to speed up the boot speed; Then it captures
immediately when Main PIR triggers.
[OFF]: turn off the PIR trigger, PIR will stop working, no longer detect.
Sensitivity
Select a different PIR trigger sensitivity.
【Auto】: automatically adjusts the PIR sensitivity according to the
change of ambient temperature. In this mode, it can adapt the different
working environments, and it triggers in high accuracy, low error
shooting.
【High】: for small temperature changes, small hot air flow environments,
detect of small mobile objects or long-range detection. At the same time
because of the high sensitivity, certain error shooting may happen.
【Medium】: Suitable for normal capture environment.
【Low】: Suitable for environment of closer detection distance and
accurate detection target
Interval
The time interval between the trigger and the next trigger. Set from 1 to
59 seconds, 1 to 60 minutes.
This setting is mainly used to control the frequency of shooting, it will help
reduce the same scene of repeated shooting.
Time and Date
Time format Set the time display format. 12 hours (eg AM 8:00) / 24 hours (eg 15:30)
Date format
Set the date format. Available in three formats: 2008-12-23; 2008/12/23;
2008/23/12
Setup time
Manu
al input date and time, year, month, day, minute and second can be
adjusted.
Time Zone Settings
Set the time zone in different countries to correct the time; usually set
time zone while setting the NTP.
When you set the time manually, you do not need to enter a time zone.
To Next Page
Loading...