ergoline AFFINITY 700 ADVANCED PERFORMANCE - Remove the Side Section Panel

Cleaning and maintenance
50/84
– Carefully lay the canopy panel aside.
The assembly is the same process in reverse order.
When assembling the device please note:
– Support the canopy panel with one hand so that it does not fall down.
– Re-lock the locks: first the lock in the middle, then the outer locks.
4.7.3 Remove the side section panel
– Turn the locks through 90°.
– Open the panel and lay it down carefully.
When assembling the device please note:
– Re-lock the locks.
– Remove fingerprints and other soiling carefully.