Cleaning and maintenance
07/2015 1015722-00B Operating instructions – 63/84
4.15 Cleaning the filter mats in shoulder
tanner
– Opening the bed base: see page 51.
– Remove the screws and then remove the lamp cover.
– Remove the filter mats.
– Dry or moist clean the filter mats or replace with new ones.
Dry cleaning: Vacuum cleaner (depending on the degree of soiling)
Moist cleaning: Water and detergent
– Do not clean in the dish-washer!
WARNING!
The device may be damaged by moisture!
The cleaned filters must be dry before they are replaced.