EasyManua.ls Logo

ergoline Classic 450 - Means of Symbols; Introduction; Service; Damage in Transit

ergoline Classic 450
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
Introduction
All claims must be made to the forwarding company that delivered your sunbed since general forwarding
conditions stipulate that the risk of transport is borne by the party ordering the goods.
On request, we will of course provide you with full assistance with any justified claim.
Means of symbols
Hazard warnings: Warning!
Risk of personal injury
Attention!
Risk of damage to property and environment
Caution - Electrical voltage!
Risk of personal injury from electrical voltage
Important information
Safety and hazard warnings
The Ergoline sunbed must only be assembled and installed by appropriately trained / experienced personnel.
All hazard and safety warnings affixed to the sunbed must be observed - also during installation. Those
persons entrusted with assembly / installation shall not approve the sunbed for operation unless it is in
perfect working order.
The installing / assembling personnel must ensure that none of the safety devices and safety warnings
affecting the safe operation of the sunbed are removed or taken out of operation.
The sunbed must be disconnected from the mains power supply before attempting any electrical installation
work. Exceptions shall only be permissible for the purpose of function checks.
Installation must only be performed in accordance with the procedure prescribed in these installation
instructions.
The safety, reliability and performance of the sunbed will only be guaranteed if:
the installation, the electrical connection, additions to or repair of the unit, is carried out by a
locally approved specialist company or by appropiately qualified personnel,
the electrical installation complies with the national regulations and the unit is used as specified
in the Operating Instructions.
Dear Customer!
In selecting a Ergoline sunbed you have acquired a high-performance appliance featuring advanced technology.
Your sunbed has been manufactured with the greatest care and precision, having undergone numerous quality
controls and safety checks. We have done everything to ensure the trouble-free and reliable operation of your
sunbed. However, you also can do a lot to ensure prolonged satisfaction with your sunbed. Please read all of
the information carefully and assemble /install the sunbed in exactly the manner described in the instructions.
Proper installation is important for your sunbed to work properly. If you follow the tips and information provided
in the installation instructions, your Ergoline sunbed will give you much joy and pleasure. However, in the
event that you should encounter a problem, please contact your local dealer.
Yours, Ergoline GmbH
Service
IBefore contacting our Technical Service by telephone, please have the serial number of the sunbed to hand for
the customer support or spare parts in question. We shall only be able to deal with your query straight away if
you can quote the serial number. Without it, service engineer visits cannot be arranged nor spare parts ordered.
Directives
This Ergoline-Ergoline sunbed has been manufactured in line with the following regulations:
EG-Directive on „Electromagnetic compatibility“ 89/336/EEC (as amended)
Low-voltage Directives 73/23 EEC (as amended)
Attention!
We must point out that these sunbeds are intended for the European market only and must not be
exported to the USA or Canada and operated there. No liability will be accepted if this warning is
ignored. It is expressly pointed out that any violation of this ban may subject the exporter and/or
operator to a high risk of liability.
Damage in transit
Despite all of the precautions taken, it is unfortunately never possible to completely rule out damage to the
sunbed in transit. Such damage is always annoying. This is why we wish to keep any inconvenience to a
minimum. If you find that your sunbed has been damaged in transit, please follow the directions given below.
This will resolve the problem quickly and easily.
Notify the forwarding company that delivered the sunbed of any visible damage in writing within a period of
four days - including the day of delivery and the day on which the forwarder received notification.

Table of Contents

Related product manuals