Operation Manual
Version: 12/01
5
er900L Operation Manual
Art-Nr: 475.043
Ergometer
Type er900L
1. Introduction
Within this Operation Manual, important comments to ensure the safety and to avoid
potential damage are labelled with following symbols:
Warning !
Describes a potential dangerous situation.
Failure to comply may lead to death or serious injuries, or may cause dam-
age to the equipment or to the environment.
!
Important !
Application hints to achieve an optimal application of the device and further
helpful information.
This Operation Manual is an integral part of the device, and has to be available at the
equipment at any time.
This Operation Manual is designed by the manufacturer according to his best knowl-
edge and experience in the construction, production and operation of the device.
The Operation Manual may be extended via special statements by the operating com-
pany, e.g. for supervision and obligatory registrations, internal maintenance plans, test-
ing intervals.
1.1 Comments by the Manufacturer for the Operating Company
As operating company, you are responsible for :
- The professional and application as directed via expert personnel which has been
instructed into the correct operation of the equipment,
- Compliance to the safety relevant information and maintenance comments,
- Compliance to the safety regulations, safety comments as well as the precautions in
respect to vocational safety and accident prevention.
- The technical instruction of the operating personnel at the device and for having taken
notice of the Operation Manual.
- The Operation Manual is accessible for the operating personnel.
Following guidelines and regulations apply to the operation of the ergometer:
- EN 60601-1 (1996) „Medical electrical equipment; General requirements for
safety“
- EN 60601-1-2 (1993) „Medical electrical equipment; General requirements for
safety; 2.“
Introduction
To Next Page
Loading...
Need help?
General
