Operation
10/2018
1020034-00
Operating instructions – 35/60
3.4.1 Navigation
The device is operated with the navigation ring.
Switch on UV lamps:
Tip the button once.
Switch off UV lamps/pause tanning:
Hold the button.
Select device function (go to pictogram)
e.g. VOLUME
Select sub-function (if available)
Change setting
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the tanning device. After selecting a function,
the respective diodes and the navi
ation rin
flash for a few seconds. Settin
s
can be changed during this time.
Operation – Demonstration mode
– press until
The audio functions and Vibra Shape can be tested in demonstration mode.
You have 30 seconds in which to select the function.
To Next Page
Loading...
Need help?
General
