Cleaning and maintenance
10/2018 1020034-00 Operating instructions – 43/60
4.6 Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Presettings', order no. 1019970-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1019967-..).
4.7 Maintenance plan
WARNING!
Only use genuine spare parts of the same type! If other
parts are used then the device no longer complies with the
conformity declaration and may not be operated any longer!
Any liability for damage or injury proven to be the result of
the use of non-genuine spare parts is excluded.
Component Interval Activity See page
Before each use
When necessary
300 operating
hours
800 operating
hours
1000 operating
hours
3000 operating
hours
a UV low pressure lamps, right X Replace 48
b UV low pressure lamps, left X Replace 47
a Acrylic panel, right X Inspect and replace
as necessary
48
b Acrylic panel, left X Inspect and replace
as necessary
47
To Next Page
Loading...
Need help?
General
