ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE User Manual

Cleaning and maintenance
46/60
4.8.1 Low pressure lamps
 Replace faulty UV low pressure lamps immediately.
 Always replace the entire set of lamps after the specified operating time.
– Turn 90° and carefully remove from the socket.
– UV low pressure lamps possess a reflector which directs the light out-
wards. The lamps must be mounted in such a way that the rear side of
the reflector is located on the device side.
– Push the pins vertically into the socket from above.
– Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the user).

ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE Specifications

General

Brand	ergoline
Model	ESSENCE 440 SMART POWER 200 VIBRA SHAPE
Category	Tanning equipment
Language	English