ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE User Manual

Cleaning and maintenance
50/60
4.11 Cleaning or replacing interior lighting
– Using suction cups, pull the lamp cover in the upper area from the panel
and remove.
Replacing lamps:
Low pressure lamp: see page 46.
The assembly is the same process in reverse order.
When assembling the device please note:
– Press in the sides of the lamp cover a little and insert into the panel from
the bottom to the top.
– Check for tight fit.
4.12 Changing the AROMA canister
– Remove the screw.
– Remove the cover.
– Remove the AROMA canister.

ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE Specifications

General

Brand	ergoline
Model	ESSENCE 440 SMART POWER 200 VIBRA SHAPE
Category	Tanning equipment
Language	English