ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE User Manual

Cleaning and maintenance
10/2018 1020034-00 Operating instructions – 49/60
– Fold down the clamping strip.
– Use the suction cup to pull out the panel from the guide.
– Remove the panel to the side and carefully place it to one side.
– Remove the screws and then remove the lamp cover.
Replacing lamps:
UV low pressure lamps: see page 46.
The assembly is the same process in reverse order.
DANGER!
Danger of crushing fingers when folding the clamping
strip!
Fingers can be crushed when folding the clamping strip.
– Do not hold fingers between the clamping strip and
acrylic glass panel when folding.

ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE Specifications

General

Brand	ergoline
Model	ESSENCE 440 SMART POWER 200 VIBRA SHAPE
Category	Tanning equipment
Language	English