EasyManua.ls Logo

ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE - Component Specific Cleaning

ergoline ESSENCE 440 SMART POWER 200 VIBRA SHAPE
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and maintenance
10/2018 1020034-00 Operating instructions – 47/60
4.9 Cleaning or replacing the UV lamps on
the left
WARNING!
Acrylic glass panels unusable due to soiling!
Soiling on the panels is burned in by the hot lamps and
results in the long term in unserviceable panels.
Remove fingerprints and other soiling carefully.
Loosen the screw.
Remove the holding bar and place on one side.
Remove the screw.
Fold down the clamping strip.
Use the suction cup to pull out the panel from the guide.
Remove the panel to the side and carefully place it to one side.

Table of Contents

Related product manuals