23
Call Forwarding
BusinessPhone - Analog Telephone
Program and activate a new external diversion address
To set a new individual external diversion address:
Lift the handset
*
22
*
Dial
0
Dial the digit(s) for external call access and enter the new
external diversion address
A maximum of 24 digits.
#
Press to activate the individual diversion
Verification tone.
Note: Individual external diversion can also be used via
the DISA function, see section “Other useful facilities”.
Cancel external diversion
Lift the handset
#
22
#
Dial
Note: The programmed diversion address is not
removed from the memory, the diversion is just inactive.
Re-activate external diversion
Divert your calls to an external position.
Lift the handset
*
22
*
#
Dial to activate the programmed external diversion
You can make outgoing calls as usual. A special dial tone
reminds you that ”Call forwarding” is active.
To Next Page
Loading...
