Selecting a Function
When you have reached the desired function, press YES to
select it.
Some of the functions have two or more settings. In the
figure above the settings are designated A, B, C and D.
The current setting, A, is shown between brackets.
To alter the setting press YES. The first alternative setting,
B, appears in the display.
You reach the other settings, C and D, by (repeatedly)
pressing Right Arrow or Left Arrow.
When you have reached the desired setting, press YES to
select it. The new setting is shown between brackets.
The NO and CLR keys
Pressing NO, takes you one level up -- from a
function to the menu -- from a menu to the
starting point.
Pressing CLR, always takes you back to the
starting point.
You will return to the starting point automatically, if you do
not press a key within 30 seconds.
If You Receive a Call while in Menu Mode
You will leave menu mode automatically if the phone rings.
Press Send (YES) to answer the call.
1
< B >
1
< C >
1
< D >
1
< A >
Settings
Function
Menu
X
< 1 > (A)
MENU
< X >
5. Using Menus
21
To Next Page
Loading...
