Ericsson GH337 - Change Security Code; Settings Menu; Ringing Signal Level; Ringing Signal Tone

Change Security Code
ACCESS
<Phone lock>
Change code
Press YES.
Enter
old code
Enter the current security code and press
#.
Enter
new code
Enter the new security code (4 to 8
digits) and press #.
Repeat
new code
Enter the new security code again and
press #.
New
code
The security code has been changed.
Settings Menu
MENU
< Settings >
The Settings menu lets you adapt your
phone to your personal needs in different
situations.
Ringing Signal Level
SETTINGS
<Ring Level>
(■■■■❑❑)
You can set the level of the ringing signal
in six steps. The first step means that
two clicks will be heard when a call is
received.
You can also choose a ringing signal that rises in steps
from the lowest to the highest level, or turn the ringing
signal OFF.
If you turn the ringing signal OFF, all audible signals will be
turned off, too. You will, however, be informed by the
indicator light on the top of the phone and the display.
You can have one volume setting when the phone is used
as a handheld unit and another setting when the phone is
used as a handsfree phone in a car.
Ringing Signal Tone
SETTINGS
<Ring Type>
(Medium)
You can adjust the tone of the ringing
signal in three steps; low, medium and
high. You can also choose a mixed tone.
You can have one volume setting when the phone is used
as a handheld unit and another setting when the phone is
used as a handsfree phone in a car.
Key Sound
SETTINGS
<Key Sound >
(Click)
You can choose whether clicks, tones or
neither (silent) will be heard when you
press the keys.
5. Using Menus
29