Ericsson GH337 - Memory Full; Erasing Phone Number (and Name); Recalling the Last 10 Phone Numbers from the Dialling Memory; Alternative Method to Recall the Last 10 Phone Numbers

b. Store the number in the selected memory position,
thus erasing the old number (and name). Press
YES.
Memory Full
If you try to store a phone number when all memory
positions are occupied, no memory position number will be
suggested in the top line of the display.
If you wish to store the phone number, you have to enter
the number of an already occupied memory position, thus
erasing the old number (and name).
Erasing Phone Number (and Name)
PHONE BOOK
< Erase .
1. Press YES to select the Erase function.
ERASE
Position: _
2. Enter the number of the memory
position (one or two digits), for
example 10, or scroll with Right
Arrow until you find the phone
number (and name) you wish to
erase.
ERASE 10
< STUART >
Erase?
3. Press YES to erase the number.
ERASE 10
Erased
4. The phone number (and name) is
erased.
Recalling the Last 10 Phone Numbers
from the Dialling Memory
To recall a number, proceed as follows:
PHONE BOOK
<Last call .
1. Press YES to select the Last Call
function.
LAST CALL
< >
12345678
2. The number last called is displayed.
To display the other numbers, scroll
with Right Arrow.
MEMORY 1
< >
234546789
3. The second to last number is
displayed, and so on.
MEMORY 2
< >
345467890
4. Press Send (YES) call the number displayed.
Alternative Method to Recall the Last 10 Phone
Numbers
1. If anything else but the time of the day is shown in
the bottom line of the display, erase it with the CLR
key.
2. Enter 0, and press #.
LAST CALL
< >
12345678
3. The number last called is displayed.
To display the other numbers, scroll
with Right Arrow.
4. Press Send (YES) to make the call.
5. Using Menus
39